Install the Dialogic NMS board
Follow these instructions referring to your product documentation for more information:
- Install the NMS board into an available PCI Express (CG 6565) or PCI 2.2-compliant slot (CG 6060).
- Connect a cable from the Ethernet port on the card to your LAN.
The default configuration of the CG boards is to auto-negotiate the capability level with the link partner.
According to the NMS documentation, the Ethernet interfaces on the CG board use a standard known as NWAY Autonegotiation. This standard allows each link partner in an Ethernet connection to inform the other link partner of its speed and capabilities. The CG board supports all combinations of 10 or 100 MB with full or half duplex. The board uses the corresponding information from the other link partner and runs at the highest capability level the link partner can support.
